INFECTIOUS DISEASE CONTROL

Services meet or exceed CDC recommendations

Preventative control or site-wide decontamination

CMI Advanced Certified Technicians

24/7 around the clock availability

LEVEL 1 - PREVENTATIVE CARE

The Preventative cleaning is your minimum infectious disease care. This cleaning will help prevent any disease that will make its way into your facility. Using an EPA approved disinfecting wipe or spray, all local touch points will be wiped thoroughly allowing the chemical to dwell on the surface for the recommended kill time. Touch points could be but are not limited to, door handles, handrails, elevators, key access points, cafeteria/break-room tables, light switches, microwaves, sinks, drinking fountains and gym equipment. This process can be done during normal cleaning hours, recommended frequency would be at a minimum of 3 times per week during peak sickness seasons.

LEVEL 2 - POSSIBLE INFECTION

The level 2 cleaning is to be done when an employee has possibly contaminated their work area and a spreading of sickness is possible. With this level, all proper PPE shall be worn always during cleaning. Proper PPE will include, hazmat suit, face mask, respirators, gloves, safety glasses. All contaminated PPE will be disposed of properly. Using an EPA approved chemical or wipe, all local touch points will be wiped thoroughly allowing the chemical to dwell on the surface for the recommended kill time. Touch points could be but are not limited to, door handles, handrails, elevators, key access points, cafeteria/break-room tables, light switches, microwaves, sinks, drinking fountains and gym equipment. Additionally, workstations will be added to the cleaning list, desk surfaces, chairs, computer mouse, cabinet handles, phones, keyboards, and monitors will be sanitized using approved EPA cleaners. All cleaning materials used in a section will be removed from the building and disposed of properly at the our facility.

LEVEL 3 - DECONTAMINATION

The final level of the cleaning process is decontamination. This process is used for a facility that has an infectious disease present. The removal of bacteria is necessary for the facility to move on with day to day operations. This process starts with our trained team sectioning off the building to remove the chance of cross contamination. In addition to the disinfecting and sanitation of all touch points and work surfaces in the section, a full carpet and floor cleaning will be performed to sanitize all floor surfaces throughout. The final step of the level 3 decontamination is using an Electrostatic Sprayer machine (https://victorycomplete.com/) to completely disinfect 100% of all surfaces in an area. When misting the contaminated section, mist must remain on surface for the EPA recommended kill time of 30 seconds. All cleaning materials and PPE will be removed from the building and disposed of properly at our facility. 

100% SURFACE DISINFECTION

In order to achieve 100% surface disinfection we use electrostatic technology to apply an even coat on all surfaces. Productivity is key to getting your facility up and running with as little down time as possible. We can affectively decontaminate over 100,000 square feet in under 8 hours. 

OUR PARTNERS

GET YOUR FREE QUOTE

Schedule a walk through, after reviewing your facilities requirements we'll create a scope of work and provide you with a written proposal good for 90 days. 

Corporate Headquarters

1050 Hardees Drive, Suite A

Aberdeen, MD 21001

 

info@baysidetcs.com

 

Tel: 443-360-4090

Fax: 443-360-4092

Employment

For job opportunities or to apply online Click Here!